noobgold.blogg.se - Manually stop plex media server mac web server

#Manually stop plex media server mac web server how to#
#Manually stop plex media server mac web server software#
#Manually stop plex media server mac web server password#

In this example, the SG350X switch is accessed through Telnet. Note: The commands may vary depending on the exact model of your switch. If you have configured a new username or password, enter the credentials instead.

#Manually stop plex media server mac web server password#

The default username and password is cisco/cisco. Applicable DevicesĬonfigure 802.1x Properties on a Switch through the CLI Configure 802.1x Settings Guest VLAN provides access to services that do not require the subscribing devices or ports to be authenticated and authorized via 802.1x, MAC-based, or web-based authentication.

#Manually stop plex media server mac web server how to#

This article provides instructions on how to configure global 802.1x properties through the Command Line Interface (CLI) of the switch, which include authentication and guest VLAN properties. To use the web-based utility of the switch, click here. To learn how to configure time range settings on your switch, click here.

(Optional) Configure Time Range on the switch.

For instructions on how to configure the global 802.1x properties through the web-based utility of the switch, click here.

Configure the global 802.1x properties on the switch.

To configure using the web-based utility, click here.

Configure Port to VLAN settings on your switch.

To create VLANs using the web-based utility of your switch, click here.

Configure Virtual Local Area Networks (VLANs).

To learn how to configure the RADIUS server settings on your switch, click here. In this example, an SG350X switch is used. The image below displays a network that have configured the devices according to the specific roles. Note: A network device can be either a client or supplicant, authenticator, or both per port. The authentication server for the device is a RADIUS authentication server with EAP extensions.

Authentication server - An authentication server performs the actual authentication of the client.

#Manually stop plex media server mac web server software#

With web-based authentication, the authenticator itself executes the EAP client part of the software on behalf of the clients seeking network access. Web-based - Supported only in multi-sessions modes. With Media Access Control (MAC)-based, the authenticator itself executes the EAP client part of the software on behalf of the clients seeking network access. MAC-based - Supported in all authentication modes. In 802.1x-based authentication, the authenticator extracts the Extensible Authentication Protocol (EAP) messages from the 802.1x messages or EAP over LAN (EAPoL) packets, and passes them to the authentication server, using the RADIUS protocol. 802.1x-based - Supported in all authentication modes.

The following authentication methods are supported: Authenticator - An authenticator is a network device that provides network services and to which supplicant ports are connected.The client is connected to an authenticator. Client or supplicant - A client or supplicant is a network device that requests access to the LAN.

In this model, network devices have the following specific roles: 802.1x authentication is a client-server model. Before services can be provided to a client by a Local Access Network (LAN) or switch, the client connected to the switch port has to be authenticated by the authentication server which runs Remote Authentication Dial-In User Service (RADIUS).Ĩ02.1x authentication restricts unauthorized clients from connecting to a LAN through publicly-accessible ports. IEEE 802.1x is a standard which facilitates access control between a client and a server. Configure Global 802.1x Properties on a Switch through the CLI Introduction